APC Back-UPS® 300, 500, 650 User's Manual 990-2004E Revision 7 12/99 Inspect Inspect the UPS and its contents on receipt:. User's Manual. Cord straps (2)UPS. Telephone cable. Warranty card. APC Solutions magazine. Equipment Protection policy 500 and 650 VA models:. PowerChute® plus software CD. Interface cable. Software Install Sheet. Ask the question you have about the APC Back-UPS 700 here simply to other product owners. Provide a clear and comprehensive description of the problem and your question. The better your problem and question is described, the easier it is for other APC Back-UPS. Installation and Operation Back-UPS® 1250, 1300, 1500 Inventory Safety and General Information This unit is intended for indoor use only. Do not operate this unit in direct sunlight, in contact with fluids, or where there is excessive dust or humidity. The battery typically lasts for two to five years. Environmental factors impact battery life.
Back-UPS
™
350/500
User's Manual
990-2085 2/01
Installation
2
Connect Equipment
The rear panel of the Back-UPS consists of the
following elements:
Battery Back Up Outlets (qty. of 3). These
outlets provide battery back-up, surge protection,
and Electro-magnetic Interference (EMI) filtering.
In case of power outage, battery power is
automatically provided to these outlets. Power
(utility or battery) is not supplied to these outlets
when the Back-UPS is switched Off. Connect a
computer, monitor, and external disk or CD-ROM
drive to these outlets.
Surge Only Outlet.This outlet is always On
(when utility power is available) and is not
controlled by the On/Off switch. This outlet does
not provide power during a power outage. Connect
a printer, fax machine or scanner to this outlet.
Note: Allow the Back-UPS to charge for a full eight
hours prior to use.
Press the push-button on the front panel of the Back-
UPS.
Observe that the following events occur after
pressing and releasing the push-button:
• The green On-Line indicator flashes.
• The yellow On Battery indicator lights while
the Self-Test is being performed.
• When Self-Test has successfully completed,
only the green On Line indicator will be lit.
• If the internal battery is not connected, (see Step
1 above) the green On Line indicator and red
Replace Battery indicator will light. The Back-
UPS will also emit a chirping sound.
ON LINE
ON BATTERY
OVERLOAD
REPLACE BATTERY
5
Connect USB Cable and Install Software (optional)
Note: TheBack-UPS software CD-ROM provides
data reporting and unattended shutdown of
computers connected to the device.The User's
Guide contains additional information about the
Back-UPS software. The User's Guide is
contained in the main folder with the CD-ROM.
Attention: USB Hubs
The Back-UPS should be plugged into the USB
port of the computer, not into a USB hub.
The computer must be powered On before
connecting the USB cable. Connect the USB cable
end (USB symbol facing down) to the rear panel
USB port of the Back-UPS. Connect the other end
of the USB cable to the USB port (usually located
on the rear panel of the computer).
Windows 98
®
and Windows Me
®
Users
The APC Power Management Extensions
software has been designed specifically to work
with Windows 98 build number 4.10.1998,
Windows 98 SE (Second Edition) 4.10.2222A,
and Windows Me (Millennium Edition).
To ascertain the build number, go to the Control
Panel, open the System dialog and view the
Apc Ups Backup 550 Battery
System information under the General tab of the
dialog. To install the software, perform the
following steps:
1. Please skip to step 4 if running Windows Me.
For Windows 98, after connecting the USB
cable, the 'Add New Hardware Wizard' dialog
box is displayed. Insert a Windows 98 operating
system CD into the computer CD-ROM drive
before proceeding.
2. Follow the installation instructions on the
computer screen.
During installation, Windows will need to
search for new drivers. When prompted, make
sure the CD-ROM drive box is checked.
There are four status indicators (lights) on the front
panel of the Back-UPS (On Line, On Battery,
Overload, and Replace Battery).
On Line (green)
- is lit whenever utility
power is powering the Battery Backup
outlets.
ON LINE
ON BATTERY
OVERLOAD
REPLACE BATTERY
On Battery (yellow)
- is lit whenever
the battery of the Back-UPS is powering
equipment connected to the Battery
Backup Outlets.
Four Beeps Every 30 Seconds - this
alarm is sounded whenever the Back-
UPS is running On Battery. Consider
saving work in progress.
Continuous Beeping - this alarm is
sounded whenever a low battery
condition is reached. Battery run-time
is very low. Promptly save any work
in progress and exit all open
applications. Shutdown the operating
system, computer and the Back-UPS.
Overload (red)
- is lit whenever
power demand has exceeded the capac-
ity of the Back-UPS.
Continuous Tone - this alarm is
sounded whenever the Battery Backup
outlets are overloaded.
Interesting but Ill have it delivered next time. I will say that the condition of the vehicle was about perfect. They came and picked it up.that simple. Now after having the car a few days my short wife was struggling with blind spots and wasn't comfy with the car. 2013 hyundai genesis coupe user manual. Everyone I worked with at Carvana was super friendly and helpful.
Circuit Breaker - the circuit
breaker button located on the rear
panel of the Back-UPS will stick
out if an overload condition forces
the Back-UPS to disconnect itself
from utility power. If the button
sticks out, disconnect non-
essential equipment. Reset the
circuit breaker by pushing the
button inward.
Status Indicators and Alarms
1
Placement / Power
3
Connect the Phone
Line to Surge Protection
Avoid placing the Back-UPS in:
• Direct sunlight
• Excessive heat
• Excessive humidity or in contact with fluids
of any type
Plug the Back-UPS into a wall outlet, as shown.
• The Back-UPS charges the internal battery
any time it is connected to a wall outlet.
Your computer's power cord.
The telephone ports provide lightning surge
protection for any device connected to the telephone
line (computer, modem, fax or telephone). The
telephone ports are compatible with Home Phoneline
Networking Alliance (HPNA) and Digital Suscriber
Line (DSL) standards, as well as all modem data
rates. Connect as shown.
Wall Outlet
Modem/Phone/Fax
Mac OS 9 (9.0.4 or higher) Users
APC Shutdown Manager software has been designed
specifically to work with Mac OS 9 (9.0.4 or higher,
except OS X). There are builds of the Mac OS prior to
Mac OS 9.0.4 with power drivers that have known
problems. Ensure that the most up to date version of
Mac OS 9 (9.0.4 or higher) is installed on the system.
Insert the APC Installation CD-ROM with the APC
Shutdown Manager software into the CD-ROM drive.
An icon called 'APC Shutdown Manager v1.0' will
appear on the computer desktop. Open the folder and
double-click the 'ReadMe' file. Ensure that the
computer's hardware matches the requirements stated
in the ReadMe file. Double-click on 'APC Shutdown
Manager v1.0' to begin the installation of the
software. At the first dialog, click on 'Continue'.
Read the displayed license agreement and click
'Accept' to agree to the terms. Click on 'Install' to
begin. After installation, click on the 'Restart' dialog
button to restart the computer.
All Other Users
The software is designed for the Windows and
Macintosh operating systems mentioned in this
section. If one of these operating systems is not
installed on the computer, the Back-UPS will still
provide these primary features:
• Battery backup, surge protection, and telephone
line protection to protect the entire desktop from
lightning and power surges.
• Runtime needed to work through brief power
disturbances. This allows time to manually save
data and shut down safely.
The disabled features include Unattended Automatic
Operating System Shutdown and Application Data
Saving.
Replace Battery (red)
- is lit when-
ever the battery is near the end of its use-
ful life, or if the battery is not connected
(see above). A battery that is near the
end of its useful life has insufficient run-
time and should be replaced.
Chirps for 1 Minute Every 5 Hours -
this alarm is sounded whenever the
battery has failed the automatic
diagnostic test.
3. After installation of the drivers is complete, a
'Windows 98 CD-ROM' dialog box may
appear. If this happens, just close the box.
4. Insert the APC Installation CD-ROM into the
computer's drive. The software user
documentation is a file on the main folder of
the CD. The filename is UsersGuide.pdf.
5. Follow the installation instructions on the
computer screen.
If the software does not automatically install,
the Windows autorun feature may have been
disabled.In this case: Choose 'Start' in the
taskbar and then the 'Run' option. Type the
following: :setup.exe.
Click 'OK'.
6. After the installation is complete, the APC plug
icon will appear in the taskbar (near the clock).
To view the Power Management user interface,
double-click on the APC plug taskbar icon or,
alternatively, choose: Start > Settings >
Control Panel > Power Management.
Note: Windows 98 and Windows Me categorize a
UPS as an HID (Human Interface Device). The
Back-UPS is listed in: Control Panel > System >
Device Manager > HID category > HID
Compliant Device.
Windows 2000
®
Users
The CD-ROM included with this package
contains a 'wizard' that optimizes a computer
system's power settings for operation with the
Back-UPS. It does this by changing various
settings in Power Options Properties in the
Control Panel. APC strongly advises that the
computer system be reconfigured by running this
wizard.
1. Insert the APC Power Management CD-ROM
into the computer's drive.
2. Choose 'Start' and then the 'Run' option.
Type: :setup.exe.
CS
®
to the Back-UPS
FLIR ONE USER GUIDE The FLIR ONE allows you to see the world in a whole new way, with a unique blend of thermal and visible imaging. This user guide provides brief information on how to use the FLIR ONE. Additional information is available directly from the FLIR ONE app in the Settings menu. Flir one gen 2 user manual. FLIR ONE Gen 2. User Manual: FLIR ONE - Android Gen 2 Android User Manual Download User Manual: FLIR ONE - iOS Gen 2 User Manual Download Warranty: FLIR ONE Limited Warranty Download. Overview Dimensions (L x W x H) 2.8 inches (72mm) ×. USER GUIDE 2 FLIR ONE PRO USER GUIDE The FLIR ONE Pro allows you to see the world in a whole new way, with a unique blend of thermal and visible imaging. This User Guide provides the information you will need to use the FLIR ONE Pro. CHARGING THE FLIR ONE PRO Plug the USB-C end of the power cable into the FLIR ONE Pro.
4
Switch on the
Back-UPS
Replace the Internal Battery
To replace the internal battery, proceed as follows:
Note: Replacing the battery is a safe procedure. However, small sparks may occur
during the process. This is normal.
Slide the new battery into the battery compartment.
2
Pull the battery out, exposing the battery terminals
and wires. Disconnect the wires from the terminals.
Place the unit on its side. Slide the battery
compartment cover upward and off of the UPS.
1
3
4
Align the battery compartment cover with the grooves
Connect the battery wires to the terminals as follows: in the UPS. Slide the cover down until it locks.
Black wire to Ground (-) terminal
Red wire to Positive (+) terminal
APC, Back-UPS, and PowerChute plus are registered trademarks of
American Power Conversion. All other trademarks are property
of their respective owners.
0017
0017
0017
Apc Backup Ups Ns1350 Users Manual Download
0017
0017
CONNECT TVSS
Back-UPS
®
RS/XS 1200
User's Manual
1
®
CONTENTS
RJ-45
USB
RJ-11
RJ-11
2
3
CONNECT BATTERY CARTRIDGE
OPERATING ENVIRONMENT
3
4
CONNECT EQUIPMENT / POWER
Monitor
Printer or Scanner
FAX
External Disk or
CD / DVD Drive
Input: 120V~
12A, 60Hz
Circuit Breaker
Push to Reset
SURGE ONLY
BATTERY BACKUP
Computer
5
CHECK BUILDING WIRING
FAULT INDICATOR
Building
Wiring Fault
Wall
Products certified by the Federal Communications Commission and Industry Canada will be distributed in the United States and Canada. Please visit the ASUS USA and ASUS Canada websites for information about locally available products. All specifications are subject to change without notice. Asus P5L-VM 1394 Pdf User Manuals. View online or download Asus P5L-VM 1394 Installation Manual. https://tygriwhistpill1970.mystrikingly.com/blog/asus-p5l-vm-1394-user-manual. View and Download Asus P5KPL-VM 1394 SI user manual online. P5KPL-VM 1394 SI Motherboard pdf manual download. Also for: P5kpl-vm. Quick start guide. Read online or download PDF. Asus P5L-VM 1394 User Manual. Products certified by the Federal Communications Commission and Industry Canada will be distributed in the United States and Canada. Please visit the ASUS USA and ASUS Canada websites for information about locally available products. All specifications are subject to change without notice. Please check with your supplier for exact offers.
Outlet
Modem/
Phone/Fax
TVSS GND
Building Wiring
Fault Indicator
6
Phone Jack
Computer
Modem Port
CONNECT PHONE/MODEM/FAX
TVSS GND
Wall
Outlet
Wall
Outlet
Modem/
Phone/Fax
7
CONNECT 10/100 Base-T or VOIP
Network Jack
Computer
Network Port
8
To Computer USB
Port
CONNECT INTERFACE
By clicking the 'Get a Free Quote' button below, I agree that an ADT specialist may contact me via text messages or phone calls to the phone number provided by me using automated technology about ADT or LifeShield offers and consent is not required to make a purchase. Adt safewatch pro 3000en user manual.
Data Port
BR24BP Battery Pack
Computer
11
INSTALL SOFTWARE ON
COMPUTER
There are four status indicators (lights) on the front
panel of the Back-UPS (On Line, On Battery, Overload,
and Replace Battery).
On Line (green)
- is lit whenever utility power is
powering the Battery Backup outlets.
On Battery (yellow)
- is lit whenever the battery of
the Back-UPS is powering equipment connected to the
Battery Backup Outlets.
Four Beeps Every 30 Seconds - this alarm is
sounded whenever the Back-UPS is running On
Battery. Consider saving work in progress.
Overload (red)
- is lit whenever power demand has
exceeded the capacity of the Back-UPS.
Continuous Tone - this alarm is sounded
whenever the Battery Backup outlets are
overloaded.
Circuit Breaker - the circuit breaker button
located on the rear panel of the Back-UPS will
stick out if an overload condition forces the Back-
UPS to disconnect itself from utility power. If the
button sticks out, disconnect non-essential
equipment. Reset the circuit breaker by pushing
the button inward.
Replace Battery (red)
- is lit whenever the battery is
near the end of its useful life, or if the battery is not con-
nected (see above). A battery that is near the end of its use-
ful life has insufficient run-time and should be replaced.
Chirps for 1 Minute Every 5 Hours - this
alarm is sounded whenever the battery has failed
the automatic diagnostic test.
Note: Allow the Back-UPS to charge for a full
eight (8) hours prior to use.
Press the front panel Power ON/OFF switch and
observe that the following events occur after
pressing and releasing the switch:
• The green On Line indicator flashes.
• The yellow On Battery indicator lights while
a Self-Test is being performed.
• When Self-Test has successfully completed,
only the green On Line indicator will be lit.
• If the internal battery cartridge is not
connected (see Step 2 above), the green On
Line indicator and red Replace Battery
indicators will light. The Back-UPS will also
emit a chirping sound.
Continuous Beeping - this alarm is sounded
whenever a low battery condition is reached.
Battery run-time is very low. Promptly save any
work in progress and exit all open applications.
Shutdown the operating system, computer and
the Back-UPS.
If Autoplay is not enabled on the computer, proceed
as follows:
1. On the computer desktop of the display, double-
click on My Computer.
2. Double-click on the CD-ROM drive icon and
follow the on-screen instructions.
If the rear panel Building Wiring Fault (red)
indicator is lit, a potential shock hazard exists
due to one of the following conditions:
• Open or high resistance ground
• Hot or neutral polarity reversed
• Overloaded neutral circuit
Improper building wiring should be
corrected by a qualified electrician. Do not
use the Back-UPS until the condition that
caused the fault is corrected.
Note: Improper building wiring will not
prevent the Back-UPS from operating, but it
will limit its protection capability.
9
SWITCH ON THE BACK-UPS
10
ORIENTATION
12
GROUND
The Back-UPS features a transient
voltage surge-suppression (TVSS)
screw for connecting the ground
lead on additional surge
suppression devices such as
network and data line surge
protectors.
Wall
Outlet
Modem/
Phone/Fax
Apc Smart Ups User Manual
TVSS GND
From Data Line
TVSS
Follow the
on-screen
instructions.
On Line
On Battery
Overload
Replace Battery
w
w
w.apc.com
®
RJ-45
USB
10/100 Base-T
VOIP
STATUS INDICATORS AND ALARMS
For connection of APC's optional
external 24-volt battery pack
(BR24BP) to the Back-UPS RS/XS 1500.
(Back-UPS RS models only)
CABLE
32 - 104
o
F (0 - 40
o https://tygriwhistpill1970.mystrikingly.com/blog/2008-fatboy-service-manual-free-download.
C)
001b
0017
0017
0017
Back-UPS
®
RS/XS 1500
